• VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

  • Brand: Vrn
  • Availability: In Stock
Special Offer in April 2024:
  • $10 Off Over $150
  • $20 Off Over $300
  • $35 Off Over $500
  • $55 Off Over $800
  • $70 Off Over $1000
  • $100 Off Over $1500
  • Enjoy Discount at Checkout!
  • Valid Till April 30th, 2024
  • Note:No coupon code needed, please place order directly!
  • Our Price:$2699.00

- +

Guaranty: 12 Months Warranty

Shipping: Fast Free Shipping Over $49!

Paypal Supports

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

 
DQ-80 Ultrasonic Scaler has both ultrasound system and air polishing system. It is suitable for scaling,periodontal treatment,air polishing and root canal irrigation.
 
VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation
 
Features:
● Seven-inch capacitive touch screen, with full touch screen adjustment.
● Intelligent switching between ultrasonic mode (G/P/E) and sandblasting mode (A).
● Intelligent negative feedback power control (power follow), using DA20 circuit
● Ultrasound function: supragingival scaling, subgingival periodontal treatment, root canal washing. (with 2 ultrasonic handpiece)
● Sandblasting function: supragingival, subgingival (with 1pc supragingival sandblasting and 1pc subgingival sandblasting )
● Single water bottle 800ml
● The electric pressure regulating mechanism is used to adjust the sandblasting air pressure.
● Built-in water heater, with constant water temperature output of 37°C, to heat the sandblasting waterway.
● Wireless foot control, exclusive patent technology, easier and safer operating. 4 control modes(start, power enhancement, vibration without water, water without vibration)
● The one-key cleaning function can clean the sandblasting pipeline.
● Use a linear power supply.
● Autoclavable LED detachable handpiece, fitting with EMS & Woodpecker
● Imported liquid pump inside, lower noise, longer life, anti-corrosion design.
 
Intended Use
This device is intended use for periodontal treatment in oral clinical treatment, air polishing and remove dental calculus, dental plaque and stains, etc. on the surface of tooth. Remove the dental calculus and plaque in the periodontal pockets. Clean and wash the root canal.
 
Anti sand blocking handpiece:
 
VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation
 
2 segment structure, five-fold sealing structure to ensure water and powder are separated. No complex 3 segment detachable structure, easy to maintain, longer service life.
 
Scaling:
 
VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation
 
Function switch,automatic recognition.Handpieces pick recognition function.
 
High speed,High efficiency:
VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation
 
 
New optimized pipeline structure can reduce fluid loss due to pressure, make the device efficiently remove dental plaque, pigment, dental stones and so on.
 
Product Structure
 
VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation
1、Ultrasonic handpiece 5、Powder flow control knob 9、Fuse
2、Display panel 6、Water bottle 10、DC power supply socket
3、Air polishing handpiece 7、Air/Water separator 11、Wired foot switch socket
4、Powder tank 8、Air intake 12、Power switch
    13、Check valve quick coupling

 

Operation Panel

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

1.G: Scaling 5.Clean: Air polishing pipe cleaning 9.Language: Chinese or English
2.P: Periodontal treatment 6.Turn down water volume/power/air pressure 10.Wireless Foot Switch: Wireless foot switch matching
3.E: Root canal irrigation 7.Turn up water volume/power/air pressure 11.Factory reset: Factory reset
4.A:Air polishing(Intelligent recognition after taking the air polishing handpiece, no need for manual selection) 8.Heating: Turn on/off the heating function of air polishing system  

 

Specification

1.Input:AC100~240V, 50/60Hz

2.Main Unit Input:25V 50Hz 2.8A

3.Water Input pressure:0.01MPa~0.05MP

4.Vibration frequency of the tip:30 kHz±5 KHz

5.Ultrasonic output power:3W~20W

6.Output Half-excursion:≤2N

7.Foot Switch Batteries:1.5V×2

8.Receiving Sensitivity:-114Db

9.Main Unit Dimensions:310mmX370mmX200mm

10.Packing Size:530×230×510mm

11.Weight of main unit:2.43 kg

12.Gross Weight:6.50 kg

 

Packing List

1.Main Unit(DQ-80)×1 11.Waterproof Sticker×1 21.Fuse×1
2.Water Bottle×1 12.Tip X10 (P11、P12、P12L、P12R、P16、G1、G5、P1、IM1、E1) 22.Powder Tank Components ×1
3.Wireless Foot Swtich×1 13.T type Quick Connector(PEG8-6)×2 23.Scaler Tips abrasion Contrast Card×1
4.Wired Foot Switch×1 14.Self-locking Quick Connector×1 24.Self-locking Quick Female Joint ×2
5.AH-1 Supragingival Sandblasting Handpiece×2 15.Torque Wrench×1 25.Self-locking Quick Male Joint×1
6.AH-2 Subgingival Sandblasting Handpiece×1 16.Endo File Wrench×1 26.Needle(0.5)×1
7.Subgingival Sandblasting Nozzle×40 17.PU Pipe 4*6mm(0.5m)×2 27.Needle(1)×1
8.PH-2 LED Scaling Handpiece×2 18.Braided Hose 4*6mm(2.5m)×1 28.Endo File(25#)×6
9.Disinfection Box×2 19.O Ring ×41 29.Tips Instruction Manual×1
10.Power Adaptor×1 20.Silicone Tube 4x1.5(11mm)×2 30.The Specification of O Ring×1

 

Comparison of VRN devices
The main differences in the design and configuration of multifunctional preventive devices produced by Guilin VRN.
 
  VRN Q-6 VRN DQ 80 VRN DQ 40
Control 3.5" LCD display 7.0" LCD display Touch panel
Water heating system / yes /
Tips 22 pcs 10 pcs 10 pcs
PH-2 LED Scaling Handpiece 2 pcs 1 pcs 1 pcs
AH-1 Supragingival Sandblasting Handpiece 2 pcs 2 pcs 1 pcs
AH-2 Supragingival Sandblasting Handpiece 1 pcs 1 pcs /
Water Tank 2x 700ml 1x 900ml 1x 900ml
Powder containers 2 pcs 2 pcs 1 pcs
Box for sterilization 2 pcs 2 pcs 1 pcs
 

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

 

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

 

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

 

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

 

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

VRN® DQ-80 Dental Ultrasonic Scaler and Air Polisher Scaling Periodontal Treatment Root Canal Irrigation

Prev:  VRN-Q5 Dental Ultrasonic Scaler LED Handpiece Painless Periodontal Therapy System
Next: VRN® DQ-40 Dental Ultrasonic Scaler and Air Polisher for Endo Scaling Periodontal

Buy china dental equipment online at dentalsalemall.com with the high-quality and affordable price!

Most order with confirmed payment will be shipped out in 2-4 business days. Delivery time may vary depends on the destination and the shipping service you choose.

 

Shipping Cost:

We provide the fast free shipping over $49. If your order amount is less than $49, we will charge $9.9 as shipping cost.


Shipping Methods:

1)Our shipping methods contains: DHL, UPS, EMS, TNT and FedEx, as well as China Post.

We will use international Express Shipping Service and the standard shipping.
1. The standard shipping way: we will ship the item by China Post, the estimated delivery time will be 7-10 business days to US, UK, AU, CA and DE; to other country, it will take 10-15 business days.
2. The Express shipping way: we will ship it by DHL, FEDEX, EMS, UPS, USPS and so on.
The delivery takes 3-7 business days to UK,USA,AU and CA. It takes 5-10 business days to other countries.

3. If the product is US STOCK, we will ship from US, the processing time is 1 business day and delivery time is 2-5 working days.

4. For the heavy products such as dental chair unit and dental lab workstation, we will ship by sea shipping, the processing time is 7-10 business day and delivery time 50-60 business days.

Note: We will choose the optimal shipping method according to the size and weight. If you need it urgently, you can contact us to ship with Express Shipping.

 



Attention:
1. Please check the package first before you sign for the package. If the package has any damage, please file a claim on your local shipping company. thanks for your cooperation
2. Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country's customs office about these additional costs before bidding or buying.

There are no reviews for this product.

Write a review

captcha
Note: HTML is not translated!
            

Related Products