• S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

Special Offer in April 2024:
  • $10 Off Over $150
  • $20 Off Over $300
  • $35 Off Over $500
  • $55 Off Over $800
  • $70 Off Over $1000
  • $100 Off Over $1500
  • Enjoy Discount at Checkout!
  • Valid Till April 30th, 2024
  • Note:No coupon code needed, please place order directly!
  • Our Price:$1127.99

- +
Bulk Price:
Qty.Range(unit) Price(unit) Discount
2 $1071.99 5%
5 $1049.99 7%
10 $1015.99 10%

Guaranty: 12 Months Warranty

Shipping: Fast Free Shipping Over $49!

Paypal Supports

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

 

Features:
Using compressed air to form negative pressure, vacuum can be drawn without a vacuum pump.
1. Imported motor and transmission.
2. The mixing cup is made of imported materials, which is not easy to break.
3. Large negative pressure and strong suction.

Operation:
1. Connect the air source to the air source connector , after turning the power:
(1) Adjust the timer to set the mixing time.
(2) Adjust the air pressure (pull up the air pressure regulator cap, turn it clockwise to increase, and turn counterclockwise to decrease) to above 4kg/cm².

2. Hold the bottom of the mixing cup with your hand, put the "cross" of the mixing cup chuck directly on the motor transmission connector and push the mixing cup upwards, turn on the power switch, and let go when the pointer of the vacuum gauge turns to 60cmHg, wait for the mixing cup after holding it firmly, press the red button switch and the mixing cup will start to rotate.

3.After the mixing work is completed, the machine will automatically sound an alarm. At the time, hold the bottom of the mixing cup with your hand, turn off the power switch, and the mixing cup will be automatically separated from the machine to end the mixing work.

Maintenance:
1. Please use the machine in a dry and well-ventilated environment.
2. The machine cannot be turned upside down.
3. Regularly clean the vacuum suction port sealing ring and the lid of the mixing cup to ensure a complete seal during work.
4. If it is found that the mixing cup cannot be adsorbed:
(1) Check the pressure gauge indicates whether it is above 4kg/cm²
(2) Check if the vacuum filter is blocked.
(3) Check whether there is debris on the vacuum suction port and the sealing ring of the mixing cup, and clean is if there is any.
(4) If the fault still cannot be eliminated, please contact the dealer.
5. Filter replacement: remove the old filter and press the new filter in.

Spefication:
Voltage:220V/50Hz, 110V/60Hz
Speed:360rpm
Power:150W
Pressure:8KG/c㎡
Weight:12KG
Size:27*24*47cm
Warranty:1 Year

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

 

S-901 Dental Lab Vacuum Mixer Mixing Machine With Two Mixing Cups

Prev:  S-801 Dental Lab Model Trimming Machine Plaster Model Trimmer with Diamond Disc
Next: 120W Dental Lab Laser Pin Hole Drilling Machine For Plaster Model Set S-703

Buy china dental equipment online at dentalsalemall.com with the high-quality and affordable price!

Most order with confirmed payment will be shipped out in 2-4 business days. Delivery time may vary depends on the destination and the shipping service you choose.

 

Shipping Cost:

We provide the fast free shipping over $49. If your order amount is less than $49, we will charge $9.9 as shipping cost.


Shipping Methods:

1)Our shipping methods contains: DHL, UPS, EMS, TNT and FedEx, as well as China Post.

We will use international Express Shipping Service and the standard shipping.
1. The standard shipping way: we will ship the item by China Post, the estimated delivery time will be 7-10 business days to US, UK, AU, CA and DE; to other country, it will take 10-15 business days.
2. The Express shipping way: we will ship it by DHL, FEDEX, EMS, UPS, USPS and so on.
The delivery takes 3-7 business days to UK,USA,AU and CA. It takes 5-10 business days to other countries.

3. If the product is US STOCK, we will ship from US, the processing time is 1 business day and delivery time is 2-5 working days.

4. For the heavy products such as dental chair unit and dental lab workstation, we will ship by sea shipping, the processing time is 7-10 business day and delivery time 50-60 business days.

Note: We will choose the optimal shipping method according to the size and weight. If you need it urgently, you can contact us to ship with Express Shipping.

 



Attention:
1. Please check the package first before you sign for the package. If the package has any damage, please file a claim on your local shipping company. thanks for your cooperation
2. Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country's customs office about these additional costs before bidding or buying.

There are no reviews for this product.

Write a review

captcha
Note: HTML is not translated!
            

Related Products