FY 120W-220W Mobile Trolley Cart UV+Ozone Disinfection Lamp Stainless Steel Trolley
FY-30FSI/ 50FSI (Four Tube Stainless Steel UV Lamp Trolley with Sensor) UV Room sterilizer FY-30FSI/ 50FSI,has 4 pieces of 30 watts/ 55watts UV lamps, emits a high intensity of ultraviolet light to the surface of the room, it can quickly and effectively sterilize all surfaces and air in a few minutes. Equipped with a timer of 0-1440 minutes, it is simpler and safer to use. The sterilizer is not only suitable for hospitals, but also widely used in schools, hotels, clinics, homes, cinemas, food manufacturing companies and offices.
This product is made of stainless steel,with its four-tube structures, but also can be used independently.
technical parameters:
1.Tube Power:≥30W×4 / 55W×4
2.Number of tubes:4
3.Applicable static area:≥60m2
4.Voltage:220V±10%,Frequency:50Hz±10%
5.Input power:180VA
6.UV wavelength:253.7nm
7.Irradiance:≥428uw/cm2
8.It is movable and foldable,the tube could be concealed inside,and adjusted to various angles:30°,60°,90°,135°,180°.
9.It is equipped with a timer equipment with the time limitation of 0-1440 min.
Usage Instruction
1.Install the base with location hole and reed.
2.Open the protection door.
3.Lift the lamp arm and adjust to 90,135,190 degrees.
4.Insert the plug and press ‘ON’ button ,adjust 0-120mins timer.
5.Leave the room right now.
6.After finishing sterilization,press ‘OFF’ button.
7.Adjust timer to ‘OFF’.
8.Hold down the ‘adjustable button 3’ to adjust lamp arm to the box .
9.Close the protection door.
Safety Considerations
1.Clean the room before using uv room sterilizer.
2.Carefully place the UV Room Sterilizer in the center of the room or on a spot where UV light can beam more things in the room.
3.Arrange everything found in the room to ensure they will be exposed to UV light. Place things that are touched more often closer to the system to maximize sterilization.
4.Plug in and set the timer to the desired duration.The system has a time delay of 15 seconds upon timer setting,this allows the system operator to vacate the room.The UV light will be on after 15 seconds.Sterilization start . (We suggest a minimum of 30 minutes to a 30 sq.m.areas.)
5.When sterilizing pet or animal room,please make sure pets don’t touch the ultraviolet sterilizer.Please protect the eyes and skins of pets with shading cloth.
6.UV Room Sterilizer will suspend and UV light will shut off if someone is around themachine.Then resume when people left.
7."Lamp 1 "control 1 lamp,'lamp 2"control another 1 lamp.
8.It will generate smell after sterilization.Open the window and ventilation for 10 minutes after sterilization.
9.Wipe the lamps with dry cloth after sterilization.Carefully stow the arms in the arms door.
10.UV illumination less than 70% or more than 2000 hours working should change the lamp.
Prev:
FY 120W-220W Mobile UV+Ozone Disinfection Lamp Ultraviolet Sterilizer Light Trolley 253.7nm
Next:
FY UV+Ozone Disinfection Lamp Stainless Steel Trolley Cart Unit w/ Infrared Sensor Hospital Factory 120W-220W
Buy china dental equipment online at dentalsalemall.com with the high-quality and affordable price!
Most order with confirmed payment will be shipped out in 2-4 business days. Delivery time may vary depends on the destination and the shipping service you choose.
Shipping Cost:
We provide the fast free shipping over $49. If your order amount is less than $49, we will charge $9.9 as shipping cost.
Shipping Methods:
1)Our shipping methods contains: DHL, UPS, EMS, TNT and FedEx, as well as China Post.
We will use international Express Shipping Service and the standard shipping.
1. The standard shipping way: we will ship the item by China Post, the estimated delivery time will be 7-10 business days to US, UK, AU, CA and DE; to other country, it will take 10-15 business days.
2. The Express shipping way: we will ship it by DHL, FEDEX, EMS, UPS, USPS and so on.
The delivery takes 3-7 business days to UK,USA,AU and CA. It takes 5-10 business days to other countries.
3. If the product is US STOCK, we will ship from US, the processing time is 1 business day and delivery time is 2-5 working days.
4. For the heavy products such as dental chair unit and dental lab workstation, we will ship by sea shipping, the processing time is 7-10 business day and delivery time 50-60 business days.
Note: We will choose the optimal shipping method according to the size and weight. If you need it urgently, you can contact us to ship with Express Shipping.
Attention:
1. Please check the package first before you sign for the package. If the package has any damage, please file a claim on your local shipping company. thanks for your cooperation
2. Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country's customs office about these additional costs before bidding or buying.
